Product

img

Filter All Types & Softners

All types of Filters, Flow rates upto 100 cu.m/h with suitable valves. MOC of filter is based on the feed water characteristics such as FRP, MS with FRP/ Rubber lining and SS 304/316. Operating pressures up to 10 kg/cm2 Multi Grade F...

Read more
img

Iron Removal Systems

Iron Removal treatment system is designed with chemical oxidation followed by coagulation with settling and filtration.

Read more
img

DM Plant

Demineralization through Cation exchange resin and Anion exchange resin followed by Mixed bed system is still the low cost method of removing dissolved salts present in water . we offered upto 50 Cu.m/h DM plant.

Read more
img

Reverse Osmosis Plant

RO plants are designed either for raw water or treated effluent recycling with energy efficient and environment friendly. Membranes are selected depends upon the feed water characteristics. Ultra Filtration systems selected for RO Pretre...

Read more
img

Sewage Treatment Plants

Sewage Treatment Plants for residential apartments, hotels, hospitals, institutions and industries for treatment of total sewage water generated and reuse.

Read more
img

Effluent Treatment Plant

Effluent Treatment Plant for different type of process industries like Textile, Tannery, Food, Dairy, Chemical, Paper industries, Slaughter house etc...for Land discharge like irrigation and Zero Discharge with suitable recycling systems. &nbs...

Read more
img

Evaporators

Evaporators for different applications like concentration of high TDS effluent water and salt recovery systems. Offered different types of Evaporators like Falling Film, Forced Circulation and natural circulation Evaporators. Offered fro...

Read more
img

Microfiltration

Microfiltration membranes are capable of retaining particles of about 0.01 microns or larger. Smaller particles (e.g. Salts, Sugars and proteins) pass through the membrane. The operating pressure for microfiltration is usually 0.1 – 1.0 bar.

Read more
img

Ultrafiltration

Particles of about 0.005 microns (MW > 100 Dalton) or larger are retained by ultrafiltration membranes. Low molecular substances (e.g. Sugars and salts) pass through the membranes. The operating pressure of ultrafiltration is 0.5 – 3 bar.

Read more
img

Nanofiltration

Water and the monovalent ions, as well as low molecular weight organic compounds (MW < 250 Dalton), pass through nanofiltration membranes. Divalent ions (e.g. MgSO4) are not allowed to pass, depending on the type of membrane. The operating press...

Read more
img

Reverse Osmosis

membranes allow only water to pass through them. Salts and dissolved organic substances with higher molecular weight more than 50 Dalton are retained to reject side. The operating pressure used for reverse osmosis usually vary between 7 and 60 bar ...

Read more