Melt Blown Filter Cartridge
PPS series filter cartridges are made of 100% polypropylene melt blown filter media making them suitable for a wide variety of applications. They are manufactured through a special process that thermally bonds pure polypropylene microfibers with lower density at the outside surface and progressively higher density toward the center.
Features And Benefits:
• Graded pore structure provides maximum dirt loading 100% polypropylene construction
• Compliant with FDA regulation 21 CFR requirement for food and beverage contact.
• Non-foaming, low to content and free from binders, lubricants or anti-static agents
• High flow rate, low pressure drop and long service leave
• Economic alternative for general purpose filtration
• Easy disposal-incinerators to non-volatile trace ash PPS series filter cartridges are available from 0. 5 micron to 100 micron rating, 9. 75" to 40" length & 2 – ½' to 4-1/2" outer diameter.
Typical Application
• Food & beverage
• RO pre-filtration
• Potable water
• Photographic solutions
• Plating solutions
• Organic solvents
End cap configuration:
• No symbol: double open end industrial, cut ends
• Ppe: double open end, polyethylene gasket seal
• Pm3: soe flat closed end, external 222 o-rings
• Pm8: soe fin end, external 222 o-rings
Pps series specifications:
• Filter media: pure polypropylene
• Micron ratings : 0. 5, 1, 5, 10, 20, 50, 75, 100
• Micron dimensions ( nominal) : 63. 5 od x id 27 mm x 254 to 1016 mm
• Maximum differential pr. : 35 psid (2. 41 bar) at 25 c (77 f) 20 psid (1. 38 bar) at 52 c (125 f)
• Recommended change- out differential pressure
• 15 psid (1. 03 bar) o ring or gasket material: silicone, epdm polypropylene